We’re on call 24/7 to react promptly to your plumbing emergencies.

We are plumberx

We are small group of plumbers and construction workers. We have combined experience of over 25 years. We can help you with plumbing problems and any other related service.

Commercial Plumbing

Heating and cooling, waste removal, and potable water delivery are among the most common uses for plumbing.

Leakage Prevention

This is just a sample text. Plumbing is any system that conveys fluids for a wide range of applications.

Services that we offer

  • HRSG
  • Rotor
  • Power Generation
  • General Plant Maintenance
  • Industrial Machinery
  • Printing Press
  • Marine

For HRSGs maximum efficiency is a must. Tubes must be completely free of resistant contamination in order to deliver as much steam as possible – otherwise hundreds, if not thousands, of dollars can be lost. Dry ice blast cleaning is the ideal choice to eliminate HRSG contamination. Solutions are tough enough to remove even the most difficult contaminants, but gentle enough that they won’t damage, scratch, or etch delicate equipment.
The dry ice blasting process uses pellets of solid CO2, which are shot at the surface at supersonic speeds. On contact with the surface, pellets creategentle explosions that loosen contaminants. This process is completely non-abrasive, and is delicate enough to clean electronics, tubes, and fine-tuned bundles. We recommend cleaning HRSG equipment every one to two years to ensure consistent efficiency.

Industrial Dry Ice Solutions:

Dry Ice Blasting
  • Cut equipment downtime by 80% compared to traditional cleaning methods
  • Are USDA, FDA, and EPA-approved
  • Do not use water or chemical solutions, and leave no secondary waste
  • Improve system reliability between cleaning cycles
  • Extend the life of your equipment

Turbine Dry Ice Cleaning Solutions

HRSG cleaning services include addressing your swing stage scaffold needs along with the removal of contaminants either in drums or containers.

Our steam generator cleaning team is HAZWOPER and confined-space trained, enabling us to operate even in the smallest of spaces.

ICS DRY ICE BLASTING

Contact our industrial cleaning company to schedule a dry ice blasting service for your heat recovery steam generator today!

Over the years, contaminated carbon deposits and winding contaminants (acids, coal dust, lubricating oil, moisture, etc.) may affect rotor performance and safety. Dry ice cleaning solutions are the ideal choice to remove contaminants, without damaging rotary electrical equipment. Solutions are non-abrasive, and can remove years of contaminants safely and swiftly.
1
  • Flеxіbіlіtу
  • Cоmреtеnсе
  • Rеѕultѕ
  • Vаluе fоr mоnеу
  • High ѕрееd

Dry ice blasting cleaning services are the ideal choice for cleaning delicate electrical generation equipment. There’s no need for equipment disassembly or relocation, which cuts on expensive downtime and potential employee injuries. Solutions do not use tools or chemical solvents, eliminating the possibility of insulation damage.
The dry ice blasting process uses pellets of solid CO2, which are shot at the surface at supersonic speeds. The pellets sublimate (or immediately change from a solid to a gas) on contact with the surface, creating tiny explosions that loosen contaminants. This process is completely non-abrasive, and is delicate enough to clean motors, generators, and electronics without fear of harming the equipment.

Dry ice blasting applications have been used to clean the following power generation equipment:

ICS DRY ICE BLASTING
  • Compressors and generators
  • AC/DC motors
  • Circuit breakers
  • Rotors
  • Stators
  • Field frames
  • Switch gears
  • Turbines
  • Windings
  • Transformers
  • Substations
  • Line insulators

Additional Benefits

Additional benefits of our dry ice power generator applications include:
  • Improved system reliability between cleaning cycles
  • Eliminated or reduced power interruptions to customers
  • Environmentally-responsible
  • Improved megohm readings
  • Increased polarization indices
  • Switching not required, improving overall safety
  • Improved thermal dissipation

Turbine Dry Ice Cleaning Solutions

Dry ice cleaning solutions are designed to remove demanding residue without harming delicate systems.

It doesn't matter the size of the fan, our non-abrasive processes are the perfect choice to clean turbines of contaminants without damaging blades, cables, or insulation.

Contact us today to schedule a dry ice blast cleaning service for your generator or turbine!

Dirt, grease, soot, oil, and other contaminants can create wear and tear on manufacturing machinery, causing malfunctions that result in an unsafe work environment. The dry ice blasting cleaning process is designed to remove buildup in production facilities in a quick, safe, and inexpensive fashion with need for expensive disassembly or downtime.
Dry ice blasting technology uses pellets of solid CO2, which are shot at the surface at supersonic speeds. The pellets sublimate, or immediately change from a solid to a gas, on contact with the surface, creating tiny explosions that loosen contaminants. This process removes stubborn contaminants without damaging the most delicate equipment, eliminating the need for water or chemical solvents.
Dry ice blasting services are ideal for removing the following contaminants from general plant maintenance applications:

  • Oil
  • Gum
  • Grease
  • Ink
  • Metallic Weld Slag
  • Insoluble Overspray
  • Adhesives
  • Petroleum
  • Tar
  • Resins
  • Mold
  • Paint
  • Soot
  • Decals

Non-Toxic Work Environments

Dry ice blasting solutions decrease employee exposure to hazardous chemicals, reducing health risks and creating safer work environments. Our process enhances Total Production Maintenance (TPM) programs, while reducing productivity line disruptions by up to 80%.

Dry ice cleaning systems are portable, reducing the possibility for damaging equipment or injuring workers during disassembly, while saving valuable time. No cool down process is required, and production can resume immediately once the cleaning process is done.

Dry ice blasting services are ideal for removing the following contaminants from general plant maintenance applications:

If your contaminant is not included in the list above, then contact us to speak to one of our experienced dry ice blast operators, and schedule your cleaning today!

The dry ice blast cleaning process is the ideal choice to remove buildup from industrial mold cavities. Over time, cavity buildup can create various problems, from creating inferior products to permanently damaging equipment. Solutions are designed to eliminate hardened plastic, mold release agents, and other buildup, without the need for disassembly or expensive downtime. Dry ice solutions can be applied while machines are in place and the mold is hot, allowing for a more comprehensive clean.
Our dry ice blasting process uses pellets of solid CO2, which are shot at the surface at supersonic speeds. The pellets sublimate, or immediately change from a solid to a gas, on contact with the surface, creating microscopic explosions that loosen contaminants. This process removes stubborn buildup without scratching, etching, or disfiguring industrial molds.

Additional benefits of industrial dry ice machine cleaning applications include:

  • Reduced waste and scrap costs
  • Increased productivity cycles between preventative maintenance schedules
  • Reduced worker exposure to hazardous chemicals
  • Safe to use around electrical systems
  • No residue left on surface
Printing presses are uniquely vulnerable to damaging residue. Ink, grease, paper lint, spray powders, and other coatings can build up and affect registration, causing alignment problems and high scrap rates.Dry ice blasting cleaning applications are well suited to clean all types of printing presses: flexography, gravure, offset, and web-fed.
Solutions are non-abrasive, so even the finest of plates used in printing processes will receive a thorough clean without risk of damage. Solutions can be applied while equipment is in place, cutting the need for expensive disassembly and eliminating the risk of machinery damage or employee injury.Dry ice blasting technology uses pellets of solid CO2, which are shot at the surface at supersonic speeds. The pellets sublimate(or immediately change from a solid to a gas) on contact with the surface, creating microscopic explosions that loosen coatings of buildup. Dry ice blasting is also ideal for removing resistant coatings of hardened ink from ink trays, also without damaging any equipment.
Additional benefits of printing press cleaning applications include:
1
  • No secondary waste
  • Safe to use around electrical equipment
  • Reduces labor costs
  • Environmentally responsible
  • Extends the lifetime of printing equipment

Cleaning Without Downtime or Disassembly

Dry cleaning solutions are portable, with no need for equipment disassembly.

We do not create secondary waste that needs disposal, and our services reduce the overall cleaning time by up to 80%.

dryiceblasting

Contact our industrial cleaning company to schedule a dry ice blasting service for your printer press today!

Traditional marine cleaning methods, such as sandblasting, pressure washing, and using chemical solvents, are time consuming and can create damage to boats and other marine equipment. The dry ice blasting process is the safest and quickest choice for cleaning and inhibiting the future growth of sea slime, algae, mussels, and other marine life.
Industrial marine cleaning services are ideal for:
1
  • Aluminum and fiberglass ship hulls
  • Exhaust systems
  • Water intake valves
  • Engines
  • Electrical panels
  • Tanks

Environmentally Responsible Marine Blasting Solutions

Because dry ice blasting technology does not use solvents or toxins, we can safely clean all marine equipment - in or out of the water.

Dry ice blasting technology uses pellets of solid CO2, which are shot directly at surfaces in need of cleaning. The pellets sublimate(or immediately change from a solid to a gas) on contact with the surface, creating tiny explosions that loosen contaminants. The CO2 evaporates, leaving only the contaminants and a clean, dry surface behind. Our processes are ecologically friendly, removing stubborn contaminants without posing any threat to marine life.

In addition, marine service applications:

  • Harmlessly inhibit re-growth of marine life
  • Extend life of marine equipment
  • Remove anti-foul coatings

To learn more about our marine service applications, contact our industrial cleaning service company. We provide one-time or regularly scheduled dry ice cleaning services upon request.

Meet Our Specialists

Team Cock

Plumbing Mechanic

Team Cock

Plumbing Mechanic

Team Cock

Plumbing Mechanic

Rock Leue

Plumbing Mechanic

What our clients say

Merry Smith

I have been using Plumberx services for long time, could not be happier. Always on time and cost effective services.

John Smith

I called them for a problem and to my surprise they showed up within 2 hours and fixed in no time.

Nina J.

I have been using Plumberx services for long time, could not be happier. Always on time and cost effective services.

Emergency Leaks & Pipe Bursts

If you have an emergency plumbing need, simply call our 24 hour emergecny plumbing

01723873549 OR Contact Us

Blogs

dryiceblasting
April 4, 2016

A small river named Duden

Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem ape riam, eaque ipsa quae ab ill

dryiceblasting
April 4, 2016

The all-powerful Pointing

Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque laudantium, totam rem ape riam, eaque ipsa quae ab ill

Powered by AcquireInfotech